How to tighten a Kawasaki Lakoda ATV chain?
Problem by Chris D: How to tighten a Kawasaki Lakoda ATV chain?
I have an approx. 2001 Kawasaki Lakoda 300 atv. I cant figure out how to tighten the chain. Can a person support. Clarify evidently or if you have any pics. Thanks
Finest reply:
Answer by G B
I am not common with your machine, but, I will consider to help. Go seem at the again axle, I suspect that you will locate at least two bolts that must be loosened and some kind of tensioning bolt(s). Loosen the large bolts and flip the tensioners (evenly) to draw the axle again until the chain is the desired tightness. have somebody large sit on the back again of the seat, then tighten the chain until it can move up and down about one inch then retighten the large bolts.
Give your response to this problem under!
http://www.bikebandit.com/parts/
Go to – your quad – Swingarm
Loosen the 2 pinch bolts at the rear of the swingarm #92150
Go to – Rear Hub
The axle bearings in the Bearing Housing #41046 are off-set.
Insert a drift (punch, philips screw driver) into the hole at the rear of the bearing housing and rotate the bearing housing.
Because the bearings are off-set, when the housing is rotated, the axle will move forward and back.