Transporting an ATV can be a challenge, especially if you do not have the right equipment. Trying to transport an ATV in the back of a truck or in an all purpose trailer is not the best idea. It can be dangerous and make the task more difficult than it has to be. An unsecured ATV is dangerous and can injure people, and damage your truck or the ATV. If you are going to transport your ATV, make sure you use a specially designed ATV trailer and properly secure your ATV. Taking large heavy equipment such as an ATV on trips with you can be stressful, but using the proper trailer will reduce the amount of stress and make your tripe and enjoyable one.
An ATV trailer is a type of trailer made to transport ATV’s. Loading, unloading, and moving your ATV is much easier with a specially designed trailer and your ATV will be much more secure during transport. Most ATV trailers are made low to the ground and include a ramp that also folds up to secure your ATV after loading it. ATV trailers are made to withstand the weight of an ATV and have other safety features including places to use straps to secure your ATV.
There are some tips you should remember to make the most of your trip while transporting an ATV. Loading and unloading your ATV may seem like the hardest part, but compared to the challenges of driving with a trailer in tow these steps are relatively easy. Make sure the ramp on your trailer stays in good condition and if it is not attached, make sure it will not slip while you load or unload your ATV.
Driving while hauling your ATV in a trailer will prove to be the hardest part of transporting your ATV. Every move you make with your vehicle will cause your trailer to move as well. If you switch lanes or turn often, your trailer will also sway and move form side to side. Because the trailer is being towed a short distance behind your vehicle, the reaction of the trailer will be delayed.
It will take a few seconds longer for the trailer to stop swaying and the movements of the trailer may be more exaggerated than that of your vehicle. If you are new to towing trailers, you should practice on quiet roads near your house before you attempt to tow your ATV long distances.
Acceleration and braking is also different when you are towing a trailer. Obviously, you will not be able to accelerate as fast when towing a trailer so make sure you give yourself plenty of room when entering the road. You will also not be able to brake as quickly so do not follow as close to cars as you normally would.
The faster you drive, the more your trailer will move so always drive with caution while pulling your ATV trailer. You should also make sure your ATV is properly secured on the trailer so that is does not come loose from bumps and vibrations and get damaged or cause damage to anything else.

If you have or are planning to buy an ATV, chances are that you will need an ATV trailer as well. An ATV trailer allows ATV owners to transport their ATV safely and much more easily than trying to use the bed of a truck. ATV trailers come in a variety of sizes depending on your needs. You can find trailers designed to haul from one to six ATV’s at a time. While other flat bed trailers can be used to transport ATV’s, a trailer designed for the task is the safest option.
An ATV trailer is made up of a deck that the ATV’s are loaded on to and a ramp that folds up during transport and serves as a safety device for holding the ATV in place. Single ATV trailers usually come in two sizes, 5′ x 8′ and 5′ x 10′. The size of your ATV will determine the best size for your ATV trailer. If you have two or more ATV’s, you can find trailers that measure 5′ x 13 or 5′ x 14′ that will fit the job. If you need to haul more that two ATV’s, you can have ATV trailers custom made to your specifications.
The trailer you choose should be sturdy and strong enough to hold the number of ATVs you intend to haul. Trying to fit more ATV’s on a trailer that was not designed for it can cause extreme stress on the trailer and the added weight can cause it to break. Most ATV trailers have a tongue mounting system and you should make sure it is sturdy and will not bend, crack, or twist during transport.
The main support beams on the trailer also need to be strong as this is where the axels attach. The weight of the trailer’s load is transferred to these beams during transport and if they are not high quality, they can bend or break. The trailers cross members should also be strong because if they twist or warp it will cause the corners to flex and will crack the trailers welds.
The safest system in an ATV trailer is the tilt clamp system. They are also easy to use and more stable. The tilt clamp system is also faster to attach than a traditional hitch system. The tilt clamp system pulls the trailer and tongue together with a T-bolt that also reduces vibration. No matter what attachment system your ATV trailer uses, make sure it is properly connected and secure. You do not want bumps and vibrations during transport to cause your trailer to become unhitched.
ATV’s can be very useful or a fun hobby. Make sure your transport method is the proper one for ATV’s and that you use the proper precautions. Always secure your ATV on the trailer and make sure the ramp is secured in the upright position so that it does not fall during transport. An unsecured ATV on the back of a trailer can be extremely dangerous. Only use a high quality trailer to ensure that it will not warp or break and it will last you many years.